A lot of electrical work gets put off because it does not look like an emergency. A light switch that feels warm, an outlet that stopped working in the spare room, a panel that hums when the house is quiet. Those are not handyman jobs. They are electrical problems, and the longer they sit, the more likely they are to become something that cannot wait. We handle all of it, from the call that starts with "I'm not sure if this is serious" to the full panel replacement that has been on the list for two years.
We take calls from homeowners and property managers across Boynton Beach every day from 5:00 AM to 8:30 PM. If you need a circuit added, a breaker looked at, a ceiling fan wired where there was never a box, or anything else on the electrical side, the process starts with a phone call. We scope the job on the call and give you a price before anything is scheduled.
Electrical pricing is not a flat rate attached to a job name. The cost of replacing an outlet is not the same as the cost of replacing an outlet where the wiring behind it turns out to be aluminum with a failing connection, or where the circuit it sits on is already at capacity. What we find when we open things up is what moves the number, and we explain that on the call before we schedule anything.
The variables that matter most are what the fault actually is, what has to be opened or moved to reach it, and whether the existing circuit or panel can carry what you are adding. A new appliance circuit in a home with a 200-amp panel and room to spare is a different job from the same circuit in a home where the panel is already full. We run through those questions on the phone so the price you agree to reflects the real job, not the simple version of it.
Call (561) 954-4953 and describe what you are seeing or what you need done.
We ask the right questions, give you a rate, and tell you what it covers. The price is confirmed before we put anything on the calendar. There is no obligation to book, and the call takes a few minutes.
Scheduling works around you. We are available every day from 5:00 AM to 8:30 PM, which means you are not choosing between taking time off work and leaving the problem until the weekend. When you call, we confirm what is available and settle on a time that fits.
For situations that cannot wait, we take short-notice calls within those hours. A sparking outlet, a panel that is running warm, a circuit that went dead and is affecting something that needs to stay on - those are not problems to schedule around a convenient window. Call and describe what is happening, and we will tell you what can be arranged.
Tenants and businesses that need to stay open are a regular part of what we handle. If a repair needs to happen during business hours, or if a rental unit has to be back in service before a tenant moves in, we work through the scope on the call and plan accordingly. The goal is to get the work done without making the day worse than the problem already did. We pick up the phone and get it handled.
Electrical work on a renovation or an addition has to happen in the right order, and when it does not, it costs more than it should. Rough-in wiring needs to be in the walls before they are closed. Circuits need to be run before cabinetry goes in. A panel upgrade needs to be completed before the inspector signs off on the work it feeds. When the electrician is called after the drywall is already up, the job gets more complicated and more expensive.
We work with homeowners and contractors on the timing. If you are coordinating a kitchen remodel, a garage conversion, or a room addition, call us early in the process. We can tell you when we need to be on site relative to the other trades, what rough-in work has to happen before anything gets covered up, and what the panel needs to be able to carry by the time the project is finished. Getting that conversation out of the way at the start avoids the kind of rework that nobody budgets for.
A few things come up consistently in this situation. Recessed lighting that was not in the original plan, a circuit for an island range hood that was not on the original drawing, or a bathroom that needs GFCI protection added because the renovation triggered a code review. We handle those as they come up, and we explain what is required versus what is optional before any additional work starts.
Older homes in Boynton Beach were wired for a different set of demands. A house built decades ago was not designed to carry a modern appliance load, a Level 2 EV charger, a hot tub, and central air conditioning running at the same time. When a property is asked to do more than its original service was sized for, something gives. Breakers trip under normal use. Lights dim when the dryer runs. The panel runs warm.
A load calculation tells us what the service is actually carrying and what headroom is left. We run one before recommending a panel upgrade, before adding a large circuit, and before any generator hookup where the transfer switch needs to be sized correctly. It is the difference between guessing and knowing.
If the panel cannot carry what you are adding, there are two practical paths: upgrade the main service to a larger capacity, or add a subpanel to handle the new load separately. Which one makes sense depends on the total demand, the condition of the existing service entrance, and what the property needs now versus what it is likely to need in the next few years. We work through that on the call and give you a clear picture of both options before anything is decided.
Whole-home rewiring comes up in the same conversation for older properties where the branch circuits themselves are the limiting factor. Knob-and-tube wiring, aluminum branch wiring, or circuits that were added without a plan all affect what the property can safely carry, and sometimes the right answer is to address the wiring rather than just the panel. Where a Boynton Beach job fits is easier to see on our electrical services page.
An inspection gives you a documented picture of what the electrical system looks like: the panel, the branch circuits, grounding, GFCI and AFCI protection, and any visible wiring concerns. It comes up before a property sale, after a purchase, when a landlord needs to confirm a rental unit is up to standard, or when a homeowner wants to know what they are working with before starting a renovation. The report covers what exists, what meets current code, and what needs attention.
A hot tub, a workshop compressor, or a large power tool needs a dedicated circuit sized for its draw. Running that circuit from the panel is straightforward when the panel has capacity. When it does not, the circuit work and the panel work happen together. We confirm the panel situation on the call before quoting the circuit, so the price you get reflects the full picture.
These run on 240 volts and need a dedicated circuit with the right outlet type for the appliance. Replacing a gas range with an electric one, or moving a dryer to a different location in the laundry room, often means running new wiring rather than reusing what is there. We check the panel capacity, run the circuit, and install the outlet before the appliance is delivered so the hookup goes smoothly.
This covers a wide range of situations: adding outlets to a room that does not have enough, replacing worn or damaged receptacles, installing GFCI protection in kitchens, bathrooms, garages, and outdoor locations, and upgrading to AFCI-protected circuits where code requires it. Dimmer switches, USB outlets, and relocated switches for renovated layouts all fall here too. The work is often done in a single visit, and the price is confirmed before we schedule.
Not every electrical problem traces back to age or wear. Some of it traces back to work that was done by someone who was not an electrician, or work that was done to a standard that no longer meets code. We run into both regularly, and the approach is the same either way: figure out what is there, determine what it would take to correct it, and explain the options before anything is touched.
Some of what we find can be corrected in place. A junction box that was wired without proper connectors, a circuit that was extended without accounting for the total load, an outlet that was replaced with the wrong type for a wet location. Those are fixable without pulling everything out.
Other situations require more. Knob-and-tube wiring that has been modified in ways that compromise its original design, aluminum branch wiring with failing connections at every outlet, or wiring that was run through a finished space without a conduit or protection. When the correction would cost more than a targeted rewire of the affected circuits, we say so. We take pride in the electrical work we leave behind, and that includes being honest about when a partial fix is not the right answer.
The conversation about prior work never needs to be a drama. We describe what we found, what it would take to address it, and what the risk is if it stays as-is. You decide what to do with that information.
We cover Boynton Beach and the communities around it, including Ocean Ridge, Briny Breezes, Golf, San Castle, and Hypoluxo. Property owners and businesses throughout this part of Palm Beach County are welcome to call. If your address is nearby and you are not sure whether we cover it, call and ask. We confirm coverage on the call.
We are available every day from 5:00 AM to 8:30 PM for repairs, panel work, wiring, inspections, generator hookups, surge protection, pool circuits, EV charger installation, and everything else on this page. Real answers. Real pricing. Real fast response.
A buzzing panel is worth a call. It can point to a loose connection, a failing breaker, or a load imbalance, and any of those can develop into a more serious problem if left alone. We diagnose the source rather than assuming it is minor.
Not always. Fishing wire through existing walls and ceilings is possible in many situations, though the feasibility depends on the construction and what the run needs to accomplish. When access is genuinely needed, we explain why and discuss the scope before anything is opened.
A failed fitting, such as a receptacle, switch, or fixture, is often a straightforward replacement. We confirm the wiring behind it is in good condition before closing up, since a fitting failure can sometimes point to a connection problem further back in the circuit.
It depends on what the panel is currently carrying. A Level 2 charger requires a dedicated 240-volt circuit, and whether the panel can add one without being upgraded depends on the available capacity. We assess that on the call and confirm what the installation actually requires before scheduling.
Yes. Landlords and property managers with multiple units call us regularly, and we can discuss how to handle scheduling and invoicing across a portfolio when you call.
If you read this far, something brought you here. A problem you are not sure how to categorize, a job you have been putting off, or a property that needs more than it currently has. That is exactly what we do.
Call (561) 954-4953 and we will scope the job, give you a price, and confirm what the visit covers before anything is scheduled.
We are available every day from 5:00 AM to 8:30 PM. One call gets the problem looked at properly.
See our full area list. Also serving: Delray Beach, Lake Worth Beach, Palm Springs.
We handle the full range of residential and commercial electrical work in Boynton Beach and across Palm Beach County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
| Lighting Installation | Recessed and LED lighting, Outdoor and security lighting, Landscape and motion sensor fixtures | Homeowners updating interior lighting or adding exterior fixtures for safety and outdoor living | South Florida's heat and humidity put real stress on outdoor fixtures. We install weatherproof, UV-rated hardware for anything going outside. |
| Electrical Repairs & Troubleshooting | Flickering lights and dead outlets, Arc and ground fault testing, Circuit tracing from panel to problem point | Homeowners or tenants dealing with an active electrical symptom | Burning smells, buzzing outlets, and partial power loss all warrant a call right away rather than a wait-and-see approach. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.
(561) 954-4953