When an electrical inspection report comes back on a Wellington property, the details in it matter. What was tested, what was flagged, and what needs to be corrected before closing or before a tenant moves in are not abstract concerns. They are line items that have to be addressed, and addressing them starts with a clear scope of work and a price confirmed before anything is scheduled. We work with property owners, buyers, and landlords across Wellington on exactly that kind of job, from a single flagged outlet to a full panel replacement required by an inspection finding.
We cover Wellington for the full range of residential and commercial electrical work. We are available every day from 5:00 AM to 8:30 PM, and the call is answered by someone who knows the trade and can scope the job on the phone. Whether the work came out of an inspection, a renovation plan, or something that stopped working last night, the process is the same: describe what you have, get a price, and decide whether to schedule.
A property inspection is often the moment a homeowner or buyer finds out what the electrical system actually looks like. The report may flag an older panel that cannot carry the current load, aluminum branch wiring that needs remediation at the connection points, circuits without GFCI or AFCI protection where code now requires it, or a grounding system that was never properly completed. Each of those is a real job with a real scope, not a suggestion.
We work through inspection findings systematically. A load calculation tells us whether the existing service can carry what the property demands, or whether a service upgrade belongs at the top of the list. GFCI protection added to kitchen, bathroom, garage, and exterior circuits is a straightforward job that clears a common inspection flag. Aluminum-wiring remediation requires the right connectors and the right outlets at every affected termination point, and we document the work so the property owner has a record of what was done and where.
Whole-home rewiring comes up when the inspection finds deteriorated wiring throughout, or when the property is old enough that the branch circuits were never grounded. That is a larger project, and the scope is confirmed on the call before anything is put on the calendar.
A fixture replacement sounds simple until the ceiling box turns out to be the wrong type, the wiring behind it is older than expected, or the circuit is already at capacity. We assess what is actually there before the work starts, run new wiring where it is needed, and make sure the circuit can carry the fixture load. Recessed and LED lighting layouts for renovated rooms, under-cabinet lighting in kitchens, and dimmer-switch upgrades all fall within this scope.
A ceiling fan that goes up where there was no fan before needs a rated ceiling box, a dedicated switch leg, and a circuit that can carry the added load. Swapping a fan for a light fixture is not always as simple as it looks, because a standard light box is not rated for the weight and movement of a fan. We handle the wiring and the box installation, not just the fixture itself.
Battery-operated detectors are not the same thing as hardwired ones. A hardwired system connects the detectors to the home's electrical circuit and links them together so that when one triggers, every unit in the house sounds. Wellington homes with older alarm systems, or with no hardwired detectors at all, are a regular part of what we see. We run the circuits, install the interconnected units, and confirm the system functions before we leave.
Knob-and-tube wiring was standard in homes built before the mid-twentieth century, and there are still properties in Palm Beach County carrying it. The problem is not just age. Knob-and-tube circuits are ungrounded, they were not designed for the loads a modern household puts on them, and insulation added over the years can trap heat in the wiring. We replace knob-and-tube branch circuits with properly grounded modern wiring, and we document the work so there is a clear record of what was replaced and what remains.
Properties in and around Wellington that draw from a well or run a dedicated irrigation system need circuits sized for the pump load. A well pump draws a significant starting current, and a circuit that was not built for it will trip breakers under normal use. We install dedicated circuits for well pumps and irrigation controls, confirm the breaker and wire gauge are matched to the load, and make sure the circuit is protected correctly.
Real answers. Real pricing. Real fast response.
The price for any electrical job depends on three things: what the fault or installation actually turns out to be, what has to be opened up to reach it, and whether the existing panel and circuits can carry the change without additional work. A straightforward outlet replacement is one conversation. A panel upgrade that turns out to require a service-entrance change is a different one. Both conversations happen on the phone before anything is scheduled.
When you call, describe what you are seeing or what you need done. We ask the questions that let us scope the job accurately and give you a price that covers what the visit will involve. If the work on site turns out to be more involved than what the phone call described, we stop and discuss the additional scope before it proceeds. You find out about it before it happens, not on the invoice.
We do not quote a number and then adjust it quietly. The price is explained, and what it covers is explained, before you agree to anything. That is how every job starts, whether it is a single circuit or a full rewire.
We are available from 5:00 AM to 8:30 PM every day, and scheduling starts on the call. Once the job is scoped and the price is confirmed, we find a time that works. For rental properties where a tenant needs to be present, we work out the access arrangement on the call so the visit does not require the landlord to coordinate in person.
We offer prompt response, even for last-minute electrical calls. A sparking outlet, a panel that is running warm, or a circuit that has gone out in a unit that needs to stay occupied are not situations most people want to leave until next week. Within our published hours, we take those calls and get the job on the schedule as quickly as what is available allows. We do not promise an arrival window, but we confirm what the schedule allows when you call.
A business that has to stay open, or a tenant who cannot be displaced for a full day, changes how a job gets sequenced. We discuss that on the call and plan the work accordingly. Not every job requires the whole property to be de-energized, and for those that do, we coordinate the timing so the disruption is as short as it needs to be.
Landlords and property managers in Wellington often book electrical work on behalf of a tenant or a unit they manage. The person who calls does not have to be the person on site. What matters is that access is arranged in advance, that whoever is present knows what the scope of work is, and that the property owner has a record of what was done when the job is complete.
We treat your home the way we would want ours treated, and that applies whether the person present is the owner or a tenant who has been asked to let us in. The scope is not adjusted based on who answers the door. The work is done to the same standard regardless.
For landlords who need documentation after the fact, the scope and the work performed are things we can walk through on a follow-up call. If a property needs an electrical safety inspection before a new tenancy, that is a job we schedule the same way as any other: scope it on the call, confirm the price, and put it on the calendar.
Most significant electrical work requires a permit, and the specific requirements depend on the jurisdiction, the type of work, and whether the installation is on private property or involves the service entrance. Panel replacements, service upgrades, new circuit installations, and whole-home rewiring are the categories most likely to require a permit and a follow-up inspection. Smaller repairs and like-for-like replacements may not, but that depends on the local authority having jurisdiction.
We handle the permit process where it is required. That means filing the paperwork, scheduling the inspection, and making sure the work is ready to pass before the inspector arrives. Permit timing can affect when the job is fully complete, and we factor that into the schedule conversation.
If you are not sure whether a specific job needs a permit, ask on the call. We will tell you what generally applies to work of that type and confirm what the process looks like before anything is scheduled. If the scope is still open, the page listing our electrical services is the place to start.
We cover Wellington and the surrounding communities throughout this part of Palm Beach County. Royal Palm Beach, Royal Palm Estates, Loxahatchee Groves, Westlake, and Greenacres are all within our service area. If your address is in the area and not on this list, call and ask. We confirm coverage on the call and do not send anyone out before the scope and the price are settled.
The county is a broad area, and the electrical work it generates varies from one community to the next. Residential work in a quiet neighborhood and commercial installations with more complex requirements both fall within what we take on. Coverage is not limited to one type of property or one type of job.
Older homes in the area frequently turn up ungrounded circuits, panels that were sized for a smaller electrical load than the property now carries, and aluminum branch wiring that needs attention at the connection points. Newer construction tends to generate calls around dedicated circuits for appliances, EV charger installation, and outdoor wiring for pool equipment and covered living spaces. The job type depends on the property, and the scope is worked out on the call.
A breaker that trips only under specific conditions is usually responding to a load that pushes the circuit past its capacity. Running a large appliance, the air conditioning cycling on, or a combination of loads that only occurs at certain hours are common triggers. We trace the pattern back to the source rather than simply resetting and waiting.
A partial outage with no tripped breaker usually points to a loose connection at the panel, a failed breaker that is not showing as tripped, or a fault in the wiring between the panel and the affected circuits. It is worth calling rather than leaving it, because a connection that is loose under load can generate heat at the panel.
Stop using the affected circuits and call (561) 954-4953 to get the problem scoped properly.
Running power to a shed involves trenching a conduit from the house to the outbuilding, pulling wire rated for direct burial or conduit, and connecting to a subpanel or a circuit in the main panel. The scope depends on the distance, the load the shed needs to support, and whether the main panel has capacity to spare.
Losing power to roughly half the home while the rest stays live often points to a problem with one leg of the service entrance rather than a single circuit. It can also indicate a failed main breaker or an issue at the utility connection. This is worth a prompt call because the fault is usually at the panel or the service entrance rather than a simple tripped breaker.
Yes. We work with property managers regularly and can discuss how to fit electrical work into a broader maintenance plan. Call and describe the arrangement and we will work out the scheduling from there.
Yes. The person who calls does not have to be the person on site. We arrange access with whoever will be present, confirm the scope with the property owner on the phone, and carry out the work as agreed. If you need a record of what was done for your files, we can walk through it on a follow-up call after the job is complete.
A load calculation adds up the electrical demand of all the circuits in a property to determine whether the service can carry the total load safely. We run one when a significant addition is planned, such as a panel upgrade, an EV charger, a pool installation, or a large appliance, to confirm the service is sized correctly for what it will carry.
Yes. Landlords and managers with multiple properties can discuss invoicing arrangements on the call. We confirm how billing is handled before the work starts so the paperwork goes where it needs to go.
Electrical problems do not announce themselves as big or small before you call. A single dead outlet might be a loose connection or the front end of a wiring problem that runs deeper. A breaker that trips once might be an overloaded circuit or a failing breaker that will not hold. The only way to know is to have someone look at it, and the only way to get that started is a call.
We are available from 5:00 AM to 8:30 PM every day for Wellington homes and businesses. We power your home. We protect your circuits. We earn the call.
Call (561) 954-4953 to get a quote.
Take a look at our full area list. We also take electrical work in: Royal Palm Beach, Palm Springs, West Palm Beach, Lake Worth Beach.
We handle the full range of residential and commercial electrical work in Wellington and across Palm Beach County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
| Electrical Repairs & Troubleshooting | Flickering lights and dead outlets, Arc and ground fault testing, Circuit tracing from panel to problem point | Homeowners or tenants dealing with an active electrical symptom | Burning smells, buzzing outlets, and partial power loss all warrant a call right away rather than a wait-and-see approach. |
| Outlet & Switch Installation | GFCI and AFCI outlet upgrades, USB and dimmer switch installation, Dedicated circuits for appliances | Renovation projects, kitchens, bathrooms, garages, and older rooms without enough outlets | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older homes often lack it. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.
(561) 954-4953