Something stopped working, or something does not look right, and you need to know what it is and what it costs to fix. A dead outlet, a breaker that will not stay reset, a panel that hums or runs warm, a ceiling fan that needs a circuit where none exists, a detached garage that has never had power run to it properly. Those are the calls we handle in Boca Raton, for property managers, homeowners, and business tenants alike. We are available from 5:00 AM to 8:30 PM every day, and the price is settled on the phone before anything goes on the calendar.
Boca Raton is a city with a wide mix of property types: older homes that have had circuits added over the years without a clear plan, newer construction that is well-wired but running heavy loads, condos and apartments where the panel is not always where you expect it, and commercial spaces that turn over and need electrical work done between tenants. We handle all of it.
Call (561) 954-4953 and describe what you are seeing, and we will tell you what the job involves and what it costs before we schedule anything.
Electrical problems don't wait, and neither do we, but on a remodel or addition the timing question is different. The electrician is not the last trade through the door. Rough-in wiring has to happen after framing is up and before drywall goes on, because once the walls are closed the cost of getting wire to the right places goes up considerably. If the panel needs an upgrade to carry the added load, that work is easier to scope and schedule before the rest of the project is locked in.
The situation that causes the most problems is when electrical is treated as an afterthought. A kitchen remodel that plans for new countertop appliances, a bathroom addition that needs GFCI circuits, a garage conversion that wants a subpanel, a covered patio that needs outdoor lighting and weatherproof outlets: all of those need the electrician involved early, not called in after the tile is already set. We work alongside general contractors and individual homeowners running their own projects, and we can tell you on the call where we need to fit in the sequence.
Getting that order right also matters for code-compliant wiring. Inspections happen at rough-in before the walls close, and the work has to be accessible and staged correctly for that to go smoothly. We take care of that coordination as part of the job.
Every home's wiring tells a different story, and a vacant unit tells it clearly. When a property is empty, the panel is accessible, every room can be opened up, and the work that would otherwise mean scheduling around a tenant's hours or working around furniture can happen cleanly in a single visit.
For rental properties in Boca Raton, the gap between tenants is the practical window for GFCI outlet upgrades in kitchens and bathrooms, electrical inspection and code correction before a new lease starts, replacing worn or damaged receptacles throughout the unit, and running dedicated circuits for appliances that have been sharing a circuit they were not designed to share. A landlord who waits until a tenant is in place to deal with a wiring concern is scheduling two problems instead of one.
Access is arranged on the call. If a property manager holds keys and can let us in, we confirm that before we arrive. If the owner needs to be present, we work around their schedule within our published hours. The scope is confirmed before we show up so the visit covers what needs covering and nothing is left open.
We also handle the inspection side for landlords who want a clear picture of what a unit's electrical system looks like before a new tenancy starts. That covers the panel, the branch circuits, grounding and bonding, and any visible wiring concerns. What we find shapes the conversation about what to do next.
A three-way switch controls a light from two locations, and a multi-location setup extends that to three or more. When one of them stops working or was never wired correctly in the first place, the fault is not always at the switch that stopped responding. We trace the circuit back through the travelers and the common terminal to find where the problem is, and we replace or rewire what needs replacing. For new installations, such as adding a switch at the bottom of a staircase that currently only has one at the top, we run the wiring and install the correct switch type for the configuration.
A detached garage or outbuilding that has no power, or that has a single extension cord running from the house, is one of the more common jobs we handle. Running a proper supply means sizing the circuit for what the space will actually draw, burying the feeder correctly, and bringing the connection into the panel in a way that is safe and documented. Electric gates need a dedicated circuit and the right outlet type at the post. We scope those jobs on the call and confirm what the panel can support before the work begins.
Recessed and LED lighting installation, fixture replacements, and adding lighting to rooms that are underlit are all straightforward jobs with a clear outcome. Where a new circuit is needed, we run it. Where an existing circuit can carry the added load, we confirm that before we tap into it. Ceiling fan installation falls in this category too, and where no ceiling box or wiring exists, we add what is needed rather than leaving the customer to figure out why the fan does not work.
A subpanel makes sense when a detached space needs multiple circuits rather than a single supply. A workshop with power tools, a garage with an EV charger and lighting, or an outbuilding that has grown beyond what a single circuit can support are all candidates. We size the subpanel for the load, run the feeder from the main panel, and install the branch circuits the space needs. Grounding and bonding at the subpanel is part of the installation, not an add-on.
Homes built in the 1960s and 1970s in this region frequently used aluminum for branch circuit wiring. Aluminum itself is not the problem. The problem is at the connection points, where aluminum and copper meet or where aluminum terminates at a device rated only for copper. Over time those connections loosen, and a loose connection under load generates heat. Remediation involves replacing devices with ones rated for aluminum, adding approved connectors at junction points, or rewiring sections of the home where the risk is higher. We assess what is there before recommending an approach.
The hardest part of an electrical problem is knowing when to call, and the answer for most situations is: now, not next week. Call when the problem shows up, and short-notice work is something we handle for situations that cannot wait. A sparking outlet, a breaker that will not hold, or a partial loss of power in part of the property are not problems to leave until a more convenient time comes along.
For tenants and businesses that need to stay open during the work, we discuss what the visit will involve on the call. Most single-circuit jobs are fast enough that a business does not need to close. Larger work, like a panel replacement, takes longer and we confirm the scope and timing before it is scheduled. We pick up the phone and get it handled. The range of work covered is explained on our full list of electrical services.
The panel is not always inside the unit in a multi-family building. In many Boca Raton condos and apartments, the panel for an individual unit is in a common hallway, a utility closet, or a mechanical room that requires building access. We account for that on the call so we are not arriving without the access we need.
The other question that comes up in shared buildings is what belongs to the unit and what belongs to the building. Branch circuits inside the unit are the owner's or tenant's responsibility. The service entrance, the meter, and shared wiring in common areas are the building's. If a problem turns out to be on the building side of that line, we tell you clearly and point you toward who to contact. We take pride in the electrical work we leave behind, and that includes being straight about what is and is not within our scope.
A quote starts with what you describe on the call. The rate is based on the work as scoped, and we confirm it before anything is scheduled. What changes a quote is what the job turns out to involve once we are on site: whether the wiring behind the wall is in the condition expected, whether the existing panel can carry the change without an upgrade, or whether getting to the fault requires opening something up that was not part of the original description.
If the work is more involved than what was scoped on the call, we stop and discuss the additional scope and cost before it proceeds. You are not agreeing to an open-ended number when you book, and you find out about a change before it happens, not on the invoice.
Call (561) 954-4953 to get the rate for your specific situation. Real answers. Real pricing. Real fast response.
We serve Boca Raton and the surrounding communities throughout Palm Beach County. That includes Highland Beach, Delray Beach, Deerfield Beach, Hillsboro Pines, and Lighthouse Point. If your address is nearby and not on this list, call and ask. We cover a broad area and can confirm availability when you reach out.
We are available every day from 5:00 AM to 8:30 PM for repairs, panel work, wiring, lighting, subpanels, generator hookups, surge protection, and everything else on this page. Commercial and residential calls are both welcome.
A property sale sometimes prompts an electrical inspection to identify any issues before closing, or remedial work to address findings from a buyer's inspection. We handle both. Call to discuss what the situation requires and we will scope it from there.
We start by reviewing what you have described on the phone, then inspect the affected area and the panel before any work begins. The goal is to confirm the diagnosis on the call matches what is actually happening, and to catch anything else that affects the job.
We discuss the project timeline with you on the call and schedule the electrical work at the right stage of the remodel. Rough-in wiring needs to happen before walls are closed, and finish work follows after. Getting the sequence right avoids having to open walls twice.
Patching is not typically part of an electrical scope unless specifically discussed and agreed to on the call. We explain what access the work requires before it starts.
Someone needs to be available to provide access and to discuss the work when we arrive. Whether you need to stay for the full duration depends on the job. We cover that when we confirm the visit.
Describe what you are seeing and we will take it from there. A noise, a smell, something that stopped working, something that does not look right. That is enough to start the conversation, scope the job, and give you a price. We are available from 5:00 AM to 8:30 PM every day.
Safe wiring. Solid workmanship. Straight answers.
Call (561) 954-4953 for a quote on electrical work in Boca Raton.
Browse our full area list. Wiring and panel work covers these nearby towns as well: Deerfield Beach, Delray Beach, Boynton Beach, Coral Springs, Lake Worth Beach.
We handle the full range of residential and commercial electrical work in Boca Raton and across Palm Beach County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Safety Inspections | Panel and branch circuit review, Grounding and bonding check, Pre-purchase and rental property inspections | Buyers, landlords, and homeowners who want a clear picture of the system before a transaction or tenant move-in | The inspection scope covers the panel, visible wiring, grounding, and any flagged concerns. We write up what we find so you have a record. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
| Electrical Repairs & Troubleshooting | Flickering lights and dead outlets, Arc and ground fault testing, Circuit tracing from panel to problem point | Homeowners or tenants dealing with an active electrical symptom | Burning smells, buzzing outlets, and partial power loss all warrant a call right away rather than a wait-and-see approach. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.
(561) 954-4953