When a renovation is on the calendar, or a new appliance is going in, or a detached garage finally needs its own circuit, the electrical side of the project shapes everything else. Getting that work right before the walls close up or the permit inspection arrives is how you avoid a second visit. We handle the full range of residential and commercial electrical work in Royal Palm Beach, from a single outlet added to a remodeled room to a complete service upgrade for a property that has outgrown its original installation.
We take calls every day from 5:00 AM to 8:30 PM. Homeowners planning additions, landlords turning over rental units, and businesses fitting out new spaces all call for the same reason: the electrical side needs to be done by someone who knows the work and will give a straight answer on the phone before anything is scheduled.
Some electrical calls can wait for a convenient window. A breaker that trips and will not reset, an outlet that sparks, or a panel that is running warm cannot. We take short-notice calls for situations that need attention before they get worse, and we work around occupied properties where a business has to stay open or a tenant cannot be without power for long.
When you call, we scope the job on the phone. You describe what is happening, we ask the questions that help us understand the fault or the installation, and we give you a price and an explanation of what the visit covers before anything is put on the calendar. Real answers. Real pricing. Real fast response.
If the problem is in a rental unit or a commercial space that needs to keep running, tell us that on the call. We work through what can be done in stages and what has to be shut down, so you are not caught off guard when we arrive.
Older properties sometimes have wiring that has never been updated, and the problems it causes are not always dramatic. Lights that dim in one part of the house, outlets that have never worked reliably, or a circuit that trips under loads it should handle easily are signs that the wiring itself may need to come out rather than just the device at the end of it. We handle full rewires and targeted rewiring of specific circuits, and we do electrical safety inspections that give a clear picture of what is there before any decisions are made.
A panel that hums, runs warm, or throws breakers under normal household load is not managing the electrical demand in the home the way it should. We replace failing breakers, swap out panels that have reached the end of their service life, and handle the full replacement when the box itself is the source of the problem. Load calculations are part of that work, confirming what the service needs to carry before a new panel is specified.
A 100-amp service was sized for homes that ran far fewer circuits and far lighter loads than most households draw now. Adding an EV charger, a pool pump, a standby generator, or significant air-conditioning load can push a smaller service past what it was designed to handle. We run the load calculation, confirm what the upgrade requires at the service entrance, and handle the work from the meter connection through the panel.
A detached garage, a workshop, a shed, or an electric gate at the property entrance all need a dedicated supply run from the main panel. We run underground or overhead feeds to outbuildings, install subpanels where the structure needs more than a single circuit, and handle the wiring for gate operators and access control that runs on a dedicated circuit.
Replacing a standard switch with a smart switch or a dimmer is a small job on its own and a bigger project when it involves adding neutral wires to older boxes that were never wired for them. We handle both, and we install GFCI and AFCI outlets where they are needed, USB outlets in home offices and kitchens, and additional outlets in rooms that were built with fewer than what the space now requires.
Covered lanais, screened enclosures, pool equipment areas, and exterior entertaining spaces all need outlets and fixtures rated for the heat, humidity, and occasional rain that come with the South Florida climate. We install weatherproof outlets with in-use covers, outdoor-rated fixtures, and the GFCI protection that is required on any circuit serving a wet or damp location.
Electrical problems with a clear source are the straightforward ones. A breaker that trips only when it rains, a circuit that fails under load but resets fine when the load is removed, a light that flickers only in the evening, or a fault that has been chased and replaced twice without fixing the underlying issue - those are a different kind of job.
Finding an intermittent fault means working through the circuit systematically rather than replacing what looks likely. That involves checking connections at every junction, testing under load conditions that replicate the fault, and sometimes tracing wiring through walls to find a point of deterioration that does not show up at the outlet or the breaker. The diagnosis takes longer than the repair, and that is normal. Getting it wrong and sending someone back a second time costs more than doing it right the first time.
We take that kind of call. If you have had the same fault looked at before and it has come back, describe the history on the phone and we will talk through what the investigation involves.
Older properties sometimes have panels, breakers, and fittings that are no longer in production. A breaker that needs replacing may have been made by a manufacturer whose line was discontinued, and fitting a substitute that is not rated for that panel is not a fix. The right answer in that situation is to identify a compatible replacement that is actually listed for the enclosure, or to replace the panel if no safe substitute exists.
The same issue comes up with light fixtures, outlet configurations, and wiring gauge in older circuits. We tell you on the call if a part needs to be ordered rather than fitted the same day, what that means for the timeline, and whether the work can be staged so the rest of the circuit stays functional while the part is sourced.
We take pride in the electrical work we leave behind, which means we do not substitute a part that is not rated for the application just to close the job faster. Homeowners in Royal Palm Beach often read our electrical services page before getting in touch.
The price for electrical work is built from what the job actually involves. A straightforward outlet replacement is priced differently from a circuit that has to be traced through a finished wall to find the fault. A panel upgrade is priced based on the service size, the condition of the existing installation, and what the service entrance requires.
Three things move a quote after the initial call: what the fault turns out to be once we are into the work, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work. If any of those shift the scope, we stop and discuss it before proceeding. You are not agreeing to an open-ended number when you book.
Call (561) 954-4953 to get a price.
Describe the job, the symptoms, or the installation you need, and we will give you a rate and explain what it covers. The wiring done properly, start to finish, is what every job here is built around.
We serve Royal Palm Beach and the surrounding communities across Palm Beach County, including Wellington, Loxahatchee Groves, Westlake, Lake Belvedere Estates, and Plantation Mobile Home Park. If your address is in the area and you are not sure whether we cover it, call and ask.
We treat your home the way we would want ours treated, and that applies whether the address is in Royal Palm Beach or in one of the neighboring communities we cover. The scope and the price are settled on the call before we schedule anything, wherever the job is.
We are available every day from 5:00 AM to 8:30 PM. Work within those hours can be scheduled based on availability. Call to discuss what the schedule allows.
We assess it as part of the job. If the existing work is code-compliant and structurally sound, we work with it. If it is not, we explain what needs to change and confirm the scope and cost before making any corrections.
Whether a refrigerator or freezer can stay on during the work depends on which circuits need to be de-energized. If the work affects the circuit that feeds the appliance, it will need to be off for that portion. We plan the sequence to minimize the time sensitive appliances are without power where possible.
Yes. Describing what you are seeing, hearing, or smelling gives us enough to explain what the likely cause is and what the job involves. You do not have to commit to a visit to have that conversation.
Call (561) 954-4953 and we can walk through it together.
If the scope changes once we are on site, we stop and discuss the additional work and the cost before proceeding. You agree to any change before it happens, not after.
Intermittent faults are worth reporting even when they are not currently active. We look for physical signs of the cause, such as loose connections, arc marks, or a breaker showing signs of stress, rather than waiting for the fault to reproduce. A fault that comes and goes is often telling you something about a connection or a load condition that a thorough inspection can surface.
We are available every day from 5:00 AM to 8:30 PM for repairs, panel work, rewiring, generator hookups, surge protection, EV charger circuits, and everything covered on this page. Wellington, Loxahatchee Groves, and the rest of the surrounding area are covered too.
Call Greenacres Electrical Company at (561) 954-4953 and get the rate before you decide.
Take a look at our full area list. Other towns where we take electrical work: Wellington, West Palm Beach, Palm Springs, Riviera Beach.
We handle the full range of residential and commercial electrical work in Royal Palm Beach and across Palm Beach County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Safety Inspections | Panel and branch circuit review, Grounding and bonding check, Pre-purchase and rental property inspections | Buyers, landlords, and homeowners who want a clear picture of the system before a transaction or tenant move-in | The inspection scope covers the panel, visible wiring, grounding, and any flagged concerns. We write up what we find so you have a record. |
| Whole-Home Generator Installation | Transfer switch installation, Panel connection and load calculation, Circuit selection for backup power | Homeowners in hurricane-prone areas who need reliable backup power when the grid goes down | A transfer switch is a code requirement, not an option. It isolates your home from the utility line so generator power cannot feed back into the grid. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.
(561) 954-4953