Home » Areas Served » Pompano Beach
Some electrical work gets planned well in advance. A kitchen renovation, a panel upgrade ahead of a pool installation, a new circuit for a workshop addition - those calls come in with a timeline attached, and scheduling is straightforward. Other calls come in because something stopped working this morning and the problem cannot wait. We handle both, and we are available every day from 5:00 AM to 8:30 PM so that the second kind of call does not get pushed to the following week.
Pompano Beach is a city with a wide mix of property types, from single-family homes and condos to commercial storefronts and multi-unit buildings. That mix means the electrical work varies considerably from one call to the next. We take all of it: repairs, troubleshooting, panel work, wiring, and installations for property owners, tenants, and businesses throughout the city.
Call (561) 954-4953 to get a quote and find out what the job involves before anything is scheduled.
Electrical problems with a clear cause are the easy ones. A dead outlet that stopped working overnight, a breaker that trips the moment you reset it, a fixture that simply will not turn on - those point somewhere specific and the diagnosis moves quickly. The harder calls are the ones where the fault is intermittent, where it only appears when the load is heavy, or where the symptom shifts depending on conditions.
A breaker that holds all week and trips on a hot afternoon when the air conditioning is running hard is telling you something about load, not necessarily about the breaker itself. An outlet that works fine indoors but fails after rain may have a moisture path somewhere in the circuit. A light that dims when a large appliance kicks on might point to a shared circuit that was never sized for both loads. Each of those takes longer to pin down because the fault is not sitting at the surface.
Finding it is its own job. We trace the circuit back from the symptom, test under load where that is what it takes, and check connections and wiring at each point along the way. Guessing at the fix without the diagnosis means the problem comes back, and a second visit costs more than a thorough first one. One call gets the problem looked at properly.
The price for electrical work is worked out on the call, based on what you describe. A straightforward outlet replacement or a ceiling fan installation where the wiring is already there is easy to scope by phone. A repair call where the fault is not yet located takes more explaining, because the price depends on what the fault turns out to be and how far back into the circuit the repair has to go.
A few things move a quote in either direction. What the fault actually is once we get into it. Whether reaching it means opening a wall, pulling wire through a finished ceiling, or accessing a junction box that has been buried. Whether the existing panel has room for a new circuit or whether the service needs to be upgraded to carry the added load. We explain all of that on the call so you know what you are agreeing to before anything is scheduled.
The price is confirmed before we put anything on the calendar. If something comes up on site that changes the scope, that conversation happens before the additional work proceeds. Real answers. Real pricing. Real fast response.
Apartment and condo electrical work comes with a layer of complexity that single-family homes do not have. In many multi-unit buildings, the panel for an individual unit is inside the unit itself, usually in a utility closet or a hallway. In others, panels are grouped in a common electrical room on each floor or in the building's main service room, and access may require coordination with building management.
What is inside the unit is typically the tenant's or owner's responsibility. What sits in a shared space, or what is part of the building's common service, usually is not. Before any panel work in a condo, it is worth confirming with the building's property manager or HOA which circuits belong to the unit and which are shared infrastructure.
Within the unit itself, we handle the full range of electrical work: outlet and switch replacement, lighting installation, circuit additions, GFCI upgrades in kitchens and bathrooms, ceiling fan wiring, and panel work on the unit's own breaker box. If the unit needs a dedicated circuit for a new appliance or a Level 2 EV charger, we assess the panel capacity and run the circuit from there.
Older condo buildings in South Florida sometimes have original wiring that has not been touched since construction. An electrical inspection gives a clear picture of what is there before decisions are made about what to update. We treat your home the way we would want ours treated, and that starts with understanding what exists before recommending what to change.
Not every electrical problem can wait for a convenient appointment window. A sparking outlet, a panel that is buzzing or warm to the touch, a circuit that has gone dead in a part of the house that cannot be worked around - those need attention quickly. We take short-notice calls within our daily hours of 5:00 AM to 8:30 PM, and we confirm availability when you call so you know what the schedule allows.
For rental properties and commercial spaces, the timing of electrical work matters beyond just the calendar. A tenant who cannot be without power in a particular room, a retail space that needs to stay open during the visit, a restaurant that can only have work done before or after service - these are scheduling realities we work through on the call. We confirm the scope, the price, and the timing before anything is booked, so the visit does not create a disruption that was not planned for.
Safe wiring. Solid workmanship. Straight answers.
A worn outlet that no longer holds a plug firmly, a switch that has to be toggled twice to make contact, or a room that simply does not have enough receptacles for how it is being used - these are all straightforward fixes that make a real difference in how the space functions. We also install GFCI outlets in kitchens, bathrooms, garages, and exterior locations, and AFCI-protected circuits where the wiring or the use of the space calls for them.
A three-way switch controls a single light from two locations, which is standard at the top and bottom of a staircase or at each end of a hallway. When one switch in a three-way pair fails, the whole arrangement stops working correctly. We diagnose which component has failed, replace it, and test the full circuit before we leave. Multi-location switching for larger spaces or outdoor areas follows the same logic and is wired to work cleanly from every control point.
Generator hookups require a transfer switch at the panel, and the transfer switch is not optional. It isolates the home's circuits from the utility line while the generator is running, which is what prevents power from feeding back into the grid. That back-feed is dangerous to utility workers and is a code violation. We install the transfer switch, connect the generator to the electrical system, and confirm the circuits it will back up are correctly configured. For a region where hurricane season runs from June through November, having a generator that is properly wired and ready to run is practical preparation, not a luxury.
Knob-and-tube wiring was standard in homes built through the early mid-twentieth century, and some of that wiring is still in service in older Pompano Beach properties. The wiring itself is not automatically unsafe, but it was not designed for the loads a modern home puts on it, it has no ground conductor, and it is not compatible with modern outlets or circuit protection devices. Replacement is typically done in sections, prioritizing the circuits with the highest load or the most deterioration, and we assess what is there before recommending the scope of the work.
Lighting installation covers a wide range: replacing an existing fixture, running new wiring for recessed or LED lighting in a room that had none, installing under-cabinet lighting in a kitchen, or adding a ceiling fan where the ceiling box needs to be installed from scratch. Recessed LED retrofits are a practical upgrade for older homes with dated fixtures, and the wiring work involved depends on whether the existing circuit can carry the new layout or whether a new circuit needs to be run. We scope that on the call and confirm the price before scheduling. Read our electrical repair services page for what to expect step by step.
We serve Pompano Beach and the communities around it throughout Broward County, including Sea Ranch Lakes, Lighthouse Point, Lauderdale-by-the-Sea, Coconut Creek, and Hillsboro Beach. Coverage extends across the county, and if your address is nearby and not on this list, call and we will confirm it.
We power your home. We protect your circuits. We earn the call.
We identify which circuits the work affects and schedule the de-energized period to be as short as practical. If you let us know on the call that a home office is a concern, we factor that into how the work is sequenced.
Stop resetting the breaker repeatedly, particularly if it trips quickly or if the panel feels warm. Note which outlets and appliances are on the affected circuit, and whether the trip happens under a specific load or at random. That information helps us scope the job accurately on the call.
Yes. We work around tenants regularly and coordinate access so the disruption is kept to a minimum. The scope and timing are discussed on the call so both the landlord and the tenant know what to expect.
If you are in Pompano Beach or a neighboring community in Broward County and need electrical repairs, panel work, wiring, generator hookups, or any of the work described on this page, call (561) 954-4953 to get a quote.
We are available every day from 5:00 AM to 8:30 PM. We take calls from across the area, and the price is confirmed before anything is scheduled.
Sea Ranch Lakes, Lighthouse Point, Lauderdale-by-the-Sea, Coconut Creek, and Hillsboro Beach are all covered.
Call (561) 954-4953 and tell us what you need.
Take a look at our full area list. Also serving: Coconut Creek, Margate, Deerfield Beach.
We handle the full range of residential and commercial electrical work in Pompano Beach and across Broward County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
| Lighting Installation | Recessed and LED lighting, Outdoor and security lighting, Landscape and motion sensor fixtures | Homeowners updating interior lighting or adding exterior fixtures for safety and outdoor living | South Florida's heat and humidity put real stress on outdoor fixtures. We install weatherproof, UV-rated hardware for anything going outside. |
| Electrical Repairs & Troubleshooting | Flickering lights and dead outlets, Arc and ground fault testing, Circuit tracing from panel to problem point | Homeowners or tenants dealing with an active electrical symptom | Burning smells, buzzing outlets, and partial power loss all warrant a call right away rather than a wait-and-see approach. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.