Riviera Beach is a city with a real mix of housing stock: postwar concrete block homes that have been added onto over the decades, newer construction closer to the waterfront, rental properties with panels that have not been touched since the original build, and commercial units where the electrical load has grown well past what the original service was designed to carry. The work that comes out of a place like this is varied. A repair call at an older house often turns into a conversation about the wiring behind the walls. A commercial call about a tripping breaker sometimes points to a service that needs upgrading before anything else can be done.
We handle all of it. Residential repairs, panel replacements, outlet and lighting work, generator hookups, surge protection, pool wiring, and the dedicated circuits that new equipment demands. We are available every day from 5:00 AM to 8:30 PM, and the call to get a quote takes a few minutes.
Call (561) 954-4953 and describe what you are seeing.
We scope the job on the phone and give you a price before anything is scheduled.
Electrical problems don't wait, and neither do we, so the first question is always whether the situation needs to be handled now or whether it can be scheduled for a convenient time. A breaker that trips once and resets cleanly is different from one that trips repeatedly under normal load, or a panel that hums and runs warm. A sparking outlet is different from one that simply stopped working. We ask the right questions on the call to figure out which situation you are in.
For short-notice calls, ask what the schedule allows and we will do what we can to fit the work in before the situation gets worse. Tenants who need power restored, landlords with a vacant unit that has to be ready before a move-in, and businesses that cannot afford to lose a circuit during business hours all call for the same reason: the problem needs to be addressed now, not later.
If the property is occupied during the work, we talk through what circuits will be affected and for how long before anything starts. That applies to a home office that needs to stay live and to a retail space that cannot shut down a register. The scope and the plan are settled on the call.
Commercial electrical work in Riviera Beach follows a different logic than a straightforward residential call. The diagnostic is the same, but the planning around it is not. A business that cannot close for the day needs to know which parts of the site will lose power, for how long, and whether the work can be staged so that at least part of the operation stays live. We work through that on the call before we schedule anything.
Out-of-hours work is an option for situations where shutting down a circuit during business hours is not practical. Early morning or evening scheduling, within our published hours, lets us do the heavier work when the building is empty or at low occupancy. Panel work, service upgrades, and new circuit runs are the jobs most likely to benefit from that kind of scheduling.
Commercial properties that have added equipment over the years often reach a point where the panel is simply not sized for the load it is carrying. New HVAC circuits, added lighting, kitchen equipment, or a tenant buildout can push a service past its design capacity. We handle load calculations, panel upgrades, subpanel installation for separate areas of a building, and code correction work where the existing installation does not meet current standards. The electrical inspection and any permit requirements are discussed on the call.
A lighting call can be as simple as replacing a fixture or as involved as running new wiring to a room that was never properly lit. Recessed lighting, ceiling fans where no ceiling box currently exists, under-cabinet lighting in a kitchen, and exterior fixtures for a covered patio or entryway all involve different amounts of work behind the wall. We assess what the ceiling or wall contains before the work starts, because an older home in Riviera Beach may not have a neutral wire at the switch location that a newer fixture expects to find.
A panel with unlabeled or mislabeled breakers is a problem that shows up in older homes and in properties that have changed hands more than once. When a circuit goes dead and nobody knows which breaker controls it, or when a contractor needs to know which circuits are available before adding a new load, a proper circuit identification and labeling job saves time and avoids guesswork. We trace each circuit, test it under load, and label the panel accurately so the next person who opens it knows exactly what they are looking at.
A detached garage or workshop that needs more than a single circuit benefits from a subpanel fed from the main service. A subpanel lets you run multiple circuits to the outbuilding without running individual home-run wires back to the main panel each time. It also makes it easier to add circuits later as the space evolves. We handle the feeder run, the subpanel installation, grounding and bonding for the outbuilding, and the branch circuits for whatever the space needs.
Running power to a shed, a detached garage, or an electric gate involves more than pulling wire. The feed needs to be sized for the load, the wiring method has to suit the run length and the ground conditions, and the connection at both ends has to be done to code. For electric gates specifically, the circuit needs to be on a dedicated breaker and the gate operator needs to be properly grounded. We scope these jobs on the call and confirm what the run involves before the work starts.
Apartments and condos present a different set of conditions than a standalone house. The panel for an individual unit is often in a utility closet, a hallway, or sometimes in a shared electrical room rather than inside the living space itself. That affects how the work is accessed and whether building management needs to be involved before anything can start.
In multifamily buildings, some parts of the electrical system are shared. The service entrance, the main disconnect, and the wiring in common areas belong to the building, not the tenant. If the problem is upstream of the unit's panel, it is the building's responsibility to address, and we will tell you that on the call rather than after we arrive. What is inside the unit, from the breaker panel to every outlet and fixture, is the unit's own system and is fully within scope for a repair or upgrade visit.
Condo associations and property managers sometimes have specific requirements about when electrical work can happen in common areas or about what permits are needed before the work starts. We talk through those requirements on the call so the visit is coordinated properly and nothing holds up the work once we are on site.
Panel replacement, service upgrades, and service entrance work require the main breaker to be off for the duration of that part of the job. In some cases, the utility needs to de-energize the meter before we can open the panel safely. We explain what needs to be shut down and for how long when we scope the job, so you can plan around it. For a home where someone works remotely, that conversation happens before anything is scheduled.
Outlet replacement, switch work, ceiling fan installation, and most lighting jobs only require the circuit serving that area to be off. The rest of the house stays live. A kitchen outlet repair does not affect the bedroom circuits. A ceiling fan installation in the living room does not touch the panel beyond turning off the breaker for that room. We identify the affected circuits on the call and confirm the scope so there are no unexpected interruptions.
The price for electrical work depends on what the job actually involves, and that is shaped by three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. A repair that looks like an outlet replacement sometimes reveals deteriorated wiring behind the wall that changes the scope. A new circuit addition that seems straightforward may require a panel evaluation before the circuit can be added safely.
Working here means getting the diagnosis right before the work starts, because a price built on the wrong diagnosis is a price that changes on site. We avoid that by asking the right questions on the call and giving you a number that reflects what the job actually involves, not a best guess at what it might be.
You get the rate on the phone before anything is scheduled. If the work on site turns out to be more involved than what was described, that conversation happens before the additional work proceeds.
Call (561) 954-4953 and describe the situation.
We will tell you what the job involves and what it costs. There is more on the full electrical services list.
We serve Riviera Beach and the communities around it throughout Palm Beach County. That includes Lake Park, Mangonia Park, Palm Beach Shores, North Palm Beach, and West Palm Beach. If your address is nearby and not on this list, call and ask. We cover a broad area and can confirm whether your location is within range when you reach out.
Coverage means the full range of residential and commercial electrical work, not just the straightforward calls. Panel upgrades, whole-home rewiring, knob-and-tube replacement, aluminum-wiring remediation, generator hookups, surge protection, pool and spa wiring, EV charger installation, and electrical safety inspections all travel with us across the area we serve.
An inspection report noting a wiring problem means something was found that does not meet the standard the inspector is applying, whether that is a current code requirement or a safety concern. We can review the report and scope the correction. The right fix depends on what was found and where.
Yes. We talk through which circuits will be affected and for how long before the visit, so the tenant knows what to expect. For work that only requires one circuit to be isolated, the rest of the unit stays live throughout. For larger jobs that need the main breaker off, we coordinate the timing with the landlord and the tenant so the interruption is as short as possible.
Permit requirements depend on the scope of the work and whether it involves the service entrance, new circuits, or panel replacement. We discuss what applies to your specific job on the call before anything is scheduled. Where a permit is required, we confirm the process and what it means for the timeline.
We look at the panel's current load, the available breaker capacity, and the demand the new appliance will add. If the supply can support it with a dedicated circuit, we run one. If the panel is already at capacity, we discuss the options before any work is scheduled.
Concrete block homes built in the postwar decades often have wiring that has been added to over time without a clear plan, panels that were sized for a much smaller load than the home now carries, and aluminum branch wiring in some cases. GFCI protection is frequently missing in kitchens, bathrooms, and exterior locations. An electrical safety inspection is the fastest way to get a clear picture of what the system contains and what needs attention.
After remedial work, we test the affected circuits and any connected components to confirm the fault has been resolved and the system is functioning correctly. If the work was part of an inspection process, the retesting follows whatever the inspection requires.
Water feature equipment such as pumps and lighting requires weatherproof wiring, GFCI protection, and in many cases a dedicated circuit depending on the load. The requirements depend on the equipment being powered and its proximity to water. We scope the electrical side on the call.
An electric range requires a 240-volt dedicated circuit, typically a 50-amp circuit run from the panel to the range location. We confirm the panel has capacity for the circuit, run the appropriate wire and outlet, and test the connection before the range is plugged in.
We are available from 5:00 AM to 8:30 PM every day, and short-notice calls are handled within those hours. Describe the job or the symptom, get a price on the phone, and we can often get someone out quickly once the scope is confirmed. Real answers. Real pricing. Real fast response.
Call (561) 954-4953 to get a quote.
We handle electrical work across Riviera Beach and Palm Beach County, and the call is how everything starts.
Browse our full area list. Electrical work in the surrounding towns: West Palm Beach, Palm Beach Gardens, Palm Springs.
We handle the full range of residential and commercial electrical work in Riviera Beach and across Palm Beach County, from a single tripped breaker to a complete service upgrade. Every job starts with a clear scope on the phone so you know what the work involves before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you ask the right questions when you call.
| Electrical Service | Scope of Work | Common Situations | Good to Know |
|---|---|---|---|
| Whole-Home Generator Installation | Transfer switch installation, Panel connection and load calculation, Circuit selection for backup power | Homeowners in hurricane-prone areas who need reliable backup power when the grid goes down | A transfer switch is a code requirement, not an option. It isolates your home from the utility line so generator power cannot feed back into the grid. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Load calculations and grounding | Homes with an undersized or aging panel, or properties adding significant new load | A panel upgrade is often the right fix for repeated tripping, warm panels, and homes that cannot support an EV charger or pool equipment without overloading. |
| Outlet & Switch Installation | GFCI and AFCI outlet upgrades, USB and dimmer switch installation, Dedicated circuits for appliances | Renovation projects, kitchens, bathrooms, garages, and older rooms without enough outlets | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. Older homes often lack it. |
Call (561) 954-4953 and we will walk you through what your job involves, confirm the scope, and get you a price before anything is scheduled.
(561) 954-4953